Pellet Stove Furnace
Pellet stoves are available as freestanding units or fireplace inserts that give your home the look of an old-fashioned wood-burning fireplace. They can be purchased as freestanding units or fireplace inserts that can give your home the look of traditional wood-burning fireplaces.
The auger transports the pellets from the hopper into the combustion chamber which is where they burn and generate heat. Sensors are able to monitor the flame and adjust the speed of operation in order to maintain the desired temperature in the room.
1. Energy Efficiency
Pellet stoves make use of renewable, non-toxic fuel that is made from compressed sawdust and other materials. These are usually disposed of in landfills, but they can be used to create a clean and efficient source of heat. They aid homeowners in reducing their energy use and lower greenhouse gas emissions. Many users of pellet stoves say that they can recoup their initial investment in only few years by reducing their heating bills.
Pellets are much more dense and compressed than natural wood, making them more efficient for burning. They also produce less creosote than traditional wood-burning fires. They are also packaged in plastic bags that block out moisture, and require less frequent cleaning.
contemporary pellet stove , as with other heating systems need to be properly sized and vented. A skilled technician can assess your space and venting requirements to ensure the most efficient results.
During installation, the hearth is constructed to the right size, and the vent is inserted through a pre-cut hole in your home's siding. The vent may be installed through a roof or sidewall depending on your preference and the local laws.
After the hearth and vent are complete then the pellet stove can be connected and turned on. Certain manufacturers offer a remote control to make it easy to start and keep the fire going, while others offer additional sensors that monitor combustion and airflow, flue temperatures, and pressure. When the system detects that it needs more or less pellets, it signals the auger to accelerate or slow down accordingly.
All stoves have a storage container that can accommodate between 35 and 130 pounds of pellets. The size of the hopper will determine how often you need to replenish your stove. Larger hoppers permit longer periods before refills is required. A grille pulls air from the room, then passes it over the heat exchanger and blows heated air through the living area through convection. A grate or auger spreads the pellets, while the pan beneath is used to collect any burned ones, along with the combustion residue.
Pellet stoves are less energy-intensive than wood-burning models, but aren't as efficient as natural gas or electric furnaces. The electric components that drive their motorized parts require electricity, which could be a problem during a power failure, but backup systems are in place for batteries and generators.
2. Low Maintenance
Pellet stoves are incredibly efficient, but like all major heating appliances, they require some care to ensure that they function properly. Cleaning your stove and its exhaust vent on a regular basis will help prevent the accumulation of harmful creosote, which could cause a fire or explosion that could cause damage to your stove and/or house.
A pellet stove is made up of compressed natural particles (such as kernels, nutshells of corn or tiny pieces of scrapwood) made from wood or other materials. An electric auger feeds the pellets from a fuel tank into the burner, and into the combustion chamber. The thermostat you choose controls the speed of pellets being fed to the burner. This lets the fire remain roaring or modulate lower or even shut down in accordance with the temperature you set. The ash is disposed of in an empty ash tray underneath the burner. This can easily be removed and then disposed.
Pellets are made from the byproducts of lumber processing which could otherwise be thrown away. They are renewable resources and release much less dust into the air than traditional wood-burning stoves resulting in a very clean burning heat source. The amount of carbon monoxide, carcinogens, and other harmful chemicals released from pellet stoves are also less than the latest EPA certified wood stoves.
These stoves aren't required to be vented via a chimney, as is the case with traditional wood stoves. Instead, they should be vented correctly through a wall, or any other exterior structure. Pellet stoves are equipped with flue ports that are located on the front or back of the appliance. They are connected to a ventpipe which extends outside the home.
One drawback of a pellet stove is that you must purchase or store enough pellets to last the winter months. Pellet stove owners typically use three tons of wood pellets each winter, which is a cost of $200 per ton. These expenses increase over time however it's much less expensive than buying and transporting firewood for an old-fashioned wood-burning fireplace or stove. You should buy enough pellets to ensure that your stove can run through the coldest winter months. Also, you'll must have a space to keep the pellets (preferably cool and dry).
3. Reduced Carbon Footprint
Pellet stoves use renewable biomass fuel to create heat, reducing dependence on fossil fuels that are depleted. This reduces carbon footprints and diversifies energy sources for homes.
Even the newest woodstoves that are EPA certified emit considerably less carbon dioxide than pellet stoves. Emissions from pellet stoves are also significantly less than those from gas furnaces. Pellets are made of wood, sawdust and other lumber leftovers and can also be composed of a variety of other materials like soybeans, corn as well as nutshells, cherries pits and agricultural waste. When they are burned, they release less particulates (leading to respiratory issues and allergies), carcinogens, carbon monoxide and the nitrous oxides.
The feed system is the main difference between a pellet stove and a wood stove. Pellet stoves are equipped with hoppers to hold the pellets. When the thermostat or sensors indicate the room is in need of heating, the auger turns. The pellets are then fed into the combustion chamber and are burned to generate heat. The combustion chamber's air is then pumped through a heat exchanger, which transfers heat to the blower. This process results in low emissions and no creosote buildup.
When the hopper is empty, a cyclone process removes the ash and places it in an ash jar. The stove is equipped with a fan that circulates the heated, clean air into the room. Most pellet stoves require only minimal maintenance and feature a large viewing area for you and your family to relax and enjoy the flames.
The main factor that influences pellet stove emissions is the quality of the pellets. The poor quality pellets emit more emissions. When choosing your pellets, ensure that they are certified as meeting certain standards and don't contain other ingredients like petroleum-based or urea-based substances. Also, look for a manufacturer who offers a warranty and will repair or replace components in the event of a problem. Some states offer homeowners a tax credit in the event that they decide to go greener. This is a great opportunity to offset the initial costs of this type stove and makes installation more affordable.
4. Reduced Noise
Pellet stoves generate less smoke and exhaust when compared to wood-burning fireplaces. A fan is used to spread heat more evenly across the room. This is one of the reasons pellet stoves require less maintenance than traditional wood stoves. While wood stoves require regular cleaning of particulates and chemicals to avoid deterioration, pellet stoves can be cleaned by a metal vacuum cleaner.
Many manufacturers have made a conscious effort to create stoves that will be easy to install and to operate as well as maintain. They come in different styles to complement the decor of your home. Some models come with a programmable thermostat and remote control as well as a WIFI applications that allow you to manage and monitor your stove from any location in the world.
Most pellet stoves come with an enormous fuel hopper that can hold anywhere from 35 to 130 pounds of pellets. The pellets are then fed into the combustion chamber by an auger. The speed at which the pellets are delivered to the burner determines how hot the flame is and the heat output. The hopper can be filled with either hardwood pellets (from dense wood species like oak and hickory) or softwood pellets (from pine and fir). A lot of stoves can use biomass pellets made of switchgrass and corn. This is a green alternative.
Pellet stoves produce less smoke and require less maintenance due to the fact that they use less polluting fuel than wood-burning fireplaces. They also don't require chimneys, making them a more appropriate choice for new constructions or retrofits.
Pellet stoves do not require regular cleaning of creosote and other chemicals similar to wood stoves. They just require periodic inspections to ensure proper operation and maintenance. Depending on the model, this could include a regular inspection and cleaning of the accumulated Ash or "clinker," as well as the motor and fan. Your appliance dealer can provide the correct procedures for your specific model and brand. He can also assist you to find the correct fuel for your stove, and give details on storage and safety.